Using the MultiMeter Peak Parameters
The MultiMeter Peak parameters are used to enable/disable the peak hold function and
to reset the peak segments of all meter types. You can also determine a temporary peak
hold duration.
• Hold button: Activates peak hold for all metering tools in the MultiMeter, as follows:
• Analyzer: A small yellow segment above each 1/3 octave level bar indicates the most
recent peak level.
• Goniometer: All illuminated pixels are held during a peak hold.
• Correlation Meter: The horizontal area around the white correlation indicator denotes
phase correlation deviations in real time, in both directions. A vertical red line to the
left of the correlation indicator shows the maximum negative phase deviation value.
You can reset this line by clicking it during playback.
• Level Meter: A small yellow segment above each stereo level bar indicates the most
recent peak level.
• Hold Time pop-up menu: When peak hold is active, sets the hold time for all metering
tools to 2, 4, or 6 seconds—or infinite.
• Reset button: Click to reset the peak hold segments of all metering tools.